Outer woven rubber hoseAs a hydraulic hose, it has higher oil resistance than traditional rubber hoses in the past. It has better chemical resistance and stronger corrosion resistance, and is an environmentally friendly high-performance rubber hose. It has higher pressure bearing capacity and lighter pipe weight than rubber hoses of the same specification. It can be designed and produced under various pressures according to user needs. Whether in processing or application, its reliable and environmentally friendly performance is highly favored by users. Here is an introduction to its use and management.

1. Do not twist the rubber hose during installation, otherwise it may cause damage or loose connections.

2. When the bending radius of the hose is too small, a right angle joint is generally used to prevent the hose from bending or twisting sharply.

3. To avoid damage and flow restriction of the outer braided rubber hose, the bending radius should be as large as possible.

4. During normal operation, do not apply excessive force when pulling the valve stem, otherwise it may cause the hose to burst.

5. When the temperature of the hydraulic system rises too high during work, it should be checked in a timely manner, and corresponding cooling measures should be taken during continuous operation.

6. When installing rubber hoses between objects, corresponding space should be left to prevent friction with the objects during operation. If unavoidable, try to take some protective measures, such as using protective sheaths.

7. The important thing is that the selection of rubber hoses should be reasonable and further improved according to environmental or technical requirements to meet specific environmental or technical requirements.

The inner wall of the outer woven rubber hose is as smooth as a mirror, neither contaminated nor contaminated by the medium; Less power transmission loss and higher efficiency. The woven layer reinforcement can be used as an insulating rubber hose due to the excellent insulation properties of the material itself. It should be noted that the interior of the hose assembly needs to be kept clean. If foreign objects (dust) enter the pump or valve, it will affect the normal operation of other equipment, indirectly affecting the hose assembly.